Hey, what's up, guys?
Welcome to country's premiere protocol.
Today, I'm going to show you how creative the traffic at the trailer.
We're going to go step by step.
And the end of this video, you'll be able to create the video just as terrific trailer.
I'm not going to show the full full video, I'm just going to show every single chapter you will need
to master for creating this video and we will start from the very beginning.
The most basic thing you need to know for creating video is working with your clips is very basic,
but it is what I always start with and what you will need to master for beginning in creating videos.
So just select your clips you recorded or you downloaded whatever, and you select your clips, what
you want to use in your video.
Once you find it in a finder or Windows browser files, you just going to click on it and drag it to
your timeline.
Premier pro, just like I'm doing here, you see important files and I got it created a sequence and
it created the resolution just as the video was recorded.
So it's an adaptive and it's a smart thing.
You can import multiple clips like this so you can import how many clips you want.
I'm just going to import only with this one to show you what I want to show you here.
The basics and working with clips is trimming them, let's say you want to trim them, just you don't
want to see the beginning of the clip and you don't want to see the end of the clip.
You just want a middle of the clip.
So you just selected the start.
We're going to start to clip by drug in this arrow.
And let's say you want to lie just in here and you just select chocolate and trim it by dragging a left
mouse.
To toe the line and its its lips to it.
So now we find the end of the clip where we want to end it and do the same.
Just like this and you Tramiel clip.
Now, what I want to show you is a simple trick you can use, and it's using the JKF shortcuts on a
keyboard when you do it by I Norling, and when you're developing this top studio, when you play,
when you press J.
So this is a very useful shortcut you can use and it makes your work a lot faster.
So we get a trimming.
We must recriminate trimming the clips.
It's very simple.
You just select the sequence clips you want to use and now let's say you want to cut your clips.
So we're going to play our clip from the beginning of our tumorous eShop blog, our commercial website,
and let's say we're going to cut off to commercial websites.
We don't want to commercial websites here or whatever just to you want to you want to make a cut wherever
in your clip.
OK, so we just select when we want to cut.
And the simple shortcut for cutting is control or command plus.
So just control costs and you see it made a cut.
Let's say we want to make another just simple do again, just press again, control or command, press
it.
And let's say we want to delete this middle middle section of the clip.
So just to press delete on your keyboard.
So this is a very simple working with clip's once you master this, you can select your clips in your
timeline and you can go for another step.
Another step in this trailer is a simple animation I made at the beginning of the trailer.
I will play for you now.
Are you ready?
So this is the information and now I'm going to show you how to do it.
We're going to move our clip now and we're going to work here in a space, so what are going to need
for this?
First, we're going to need the background.
So now I'm going to show you how to make a simple color background.
What you want to do for creating a background, just you get a project here is a project with all your
sources and simple, right?
Click in this window and go for new item and color that new item column at left.
Click on it.
And now here is a resolution.
But I leave it just like this, so I press OK, and now you can search the color of your of your background
you are making.
So in the animation I used some light pink.
So I'm going to search for I think something like this.
OK, Klemet, you can name it.
I'm going to name it pink.
OK, and you can see we created the background climate, so now.
How important to a timeline?
It seems like the video you just directed and place it to a timeline and you can see we get a pink background.
So what do we need now?
The next thing we created there was a title or text text player.
So how to create a text layer?
For text, you go top left corner here and press on file left, click, go for new and go for legacy
title.
There are some shortcuts for this.
It's control, but I use it.
I just I'm just used to make it like this from file.
And you like the title press.
OK, you can, you can again name it but I have a title that one and press OK.
And you can see it created this video, this popup window.
So now here's a type two and I'm going to click to this workspace and type traffic as we can see it
now.
But we'll make it better by changing the font in the trailer.
I used to Poppins font, so I'm going to take Poppins and I used the boat opens.
Now, what you want to do is scaling your text, as you can see when you aim for it with these little
arrows on the text.
So you just simply drag it and make it bigger.
When you want to send it to your workspace here left you, you have the dissection center, so just
center it horizontally and vertically.
And when you want to change the color of your text, it is here, as you can see, fill in color.
We get a we get a blue, we get a white here.
So I'm going to press on it.
And we used some light blue there.
I'm going to soak some light blue, just something like this.
And as you can see, we get a terrific title so you can press, press across, close it.
And what you do now, just simple as same as the background.
Just drag it and.
Just just place it to a timeline, as you can see, we get a big round and we get a title, traffic
gets so.
What is next, next thing is importing the image of the mouse and the money so we can to just browse
your files and find a PMG picture.
So I find it here.
I got downloaded.
And as you can see, I imported just a segment with you.
You can import, of course.
And the other picture, I just use this for for the animation to make the same as in trailer.
As you can see, it's too big.
How to adjust the size just here on window double click on it.
And as you can see with a double click on a layer, you can move it and you can also scale it.
So I'm just going to scale it.
Move it again, scale, it's a little more make it just make it smaller, maybe a little more, and
you go play it click, click next to a new video and you'll get to place your picture in your timeline.
As you can see, we get a background color and make it bigger.
I'm going to zoom it.
So we get a pink color title one and picture, and this is all what we need now.
What is happening there in the animation is scaling.
So now we're going to learn how to animate the scale of these objects.
So for scaling, you just press here on time line whatever you want to scale, so let's say we're going
to scale the title one traffic gets title and you, as you can see, left FAA controls.
You get it here automatically and you can see the section scale.
Now, what are you going to do?
If you want to change your scale temporarily, you just scale it here.
You can type whatever here, for example, one fifty or something.
But we're going to animated and it's not more complicated.
It is just a simple few steps we're going to go from now.
So if you go to an animated scale, you just click here on a toggle.
Animation, as you can see, is icon of the stopwatch.
So we're going to click on it.
And now we are animating, as you can see, it created here, the little dot.
This is the animation section.
No, we're going to move to the beginning of the animation sections, which is here, and it created
the dot here and the dot means it's scale 100.
We're going to move to the end.
Off of our object and we're going to scale it to one 20, for example, OK, click next to it.
As you can see, it created another dot here.
And if we played now again by pressing L, you can see the text is slowly scaling up.
So.
We're going to make the same with the with picture of the mouse and the money, so again, scale it
scale is truly to move to the end.
And scale it to, I don't know, 50 click next to it again creates a dot.
And as you can see, if you move it back to the beginning and play it, it's slowly scaling up with
the text behind it.
And this is this is what we work for.
So we're going to move the clip next to it.
Just we get it in a trailer just tight.
And as you can see, it's moving, moving.
And then it jumps to our clip just like this, are you?
So and what we made here, we made to disappear.
Do traffic at picture mounted a little little earlier than text.
So how to do it?
How to do it?
Just trimming the clip.
We know it from the beginning of this tutorial.
Just selected and trim it a little earlier.
As you can see, it disappears earlier.
But we we had a little animation there.
It didn't disappear just like this.
And we had to mention there called push.
So now I'm going to show you how to make push effect.
So for the push or slide effects or whatever effects you want to use in your clips, just simple growth
here in left left section of your walking space, click on this little two arrows and go for effects.
As you can see, here is the library of your effects.
I searched something there before, but it will look like this.
Just a simple library of effects.
And here you can browse whatever effect you want to use for every video.
But now we're going to learn how to make a push effects.
So we're going to begin a search for push.
And as you can see, there's a push effect.
How to how to make it to your timeline.
Simple as a video.
Just drag it and place it on a clip.
You want to use it.
As you can see, if I play it here again by pressing l shortcut it, push away from the window.
But we didn't want to push it from left to right, but we're going to push it from bottom to upper side.
So how to make it simple.
Click on a push effect here and in effect control.
Here, here is a little menu that you can adjust your effect.
And now we're going to click on this little arrow, as you can see, it called Sultanov.
And if you're going to click it, it makes the animation from bottom to the upper side.
Now, we play it again here.
As you can see, it slides away from the bottom to upper side.
So this is it.
And now we're going to make to disappear the title with the background and how to make it.
It's it's, again, the same.
We're going to apply the push effect here on a title.
As you can see, it slides away.
And and if you're going to make it to the background, to the you're going to make push here.
But as you can see it persuade title, are you ready?
And then the background goes away with the push.
So this is basically what we need.
All we need to know for creating this little animation that you may notice in the animation I showed
before, they are little sound effects.
So I'm going to show you how to add this sound effect that supports the animation.
So for sound effects, I use the sound effects called Bush, and the whoosh effect is is greatly like
supporting the animation and it makes a little more feeling to it.
So I don't know this free rush effect back, but you can you can find it wherever on the Internet.
You can download for free.
You can buy some.
I don't this free pack and how to how to import it to a time line.
Simple as that.
We do just drag it, drag it from your finder or file browser and just place it to your timeline.
OK, so here you can see there are some whoosh effect if I play it, are you it just some effects,
let's say I like the first one.
So we're going to it as the video.
We already know how to make it.
So just TriMet.
And place it to your to your push affect, just just find where it is and place it, place it.
So the push of this above the sound effect, so.
How to duplicate the sound effect here, just hold your left out on a keyboard and drag your sound effect
on the timeline for another Bush effect if I play it.
You can see two hoosh effects, it's very effective, but you may notice it's just a little too loud.
So how to adjust it?
It's loudness.
So how to adjust the volume of your clips, they just select your clips and on a keyboard press the
shortcut, gee, if you press it, it pops out this little window every again.
So we're going to set game to, let's say, minus 20 decibels.
And if a plate now.
OK, you can hear it's a little softer and now I just like it like this, so if I play it from the beginning,
the effect we get to scale here.
HOOSH, are you ready?
And we're going to jump right into a clip, so this is the basic of animations you need to know for
creating the trailer or video you want to make and these steps you're going to use in all the sections.
So there are no more effects.
You just need to master these little animations, these little effects and sections, and you could
master all the chapters we are used or the effects are used in traffic.
That trailer for a trailer, you might ask how to edit music for your video and it just it just same
as a as a sound effect.
You just download your songs or your instrumental songs you want to make for you want to add for your
video which is downloaded, and if you have it in your computer, you just find it in your finder or
file browser.
And again, just again, drag it to your timeline.
It's very simple.
And now you have your music here.
It may be too loud again.
So I'm going to make it again and again.
Again to minus 20 decibels, OK?
And if I if I play my clip now, are you ready to become the master of driving the traffic?
You can hear the soft little piano music and the background of the video and it makes a little more
feeling to the video.
So I, I always use it for trailers because because the music makes makes a lot for your video.
So this is the music.
Another thing we're going to learn now is the titling your text in the video.
I'm going to play you a little example here.
You ready to become the master of driving the traffic?
How to make it?
We got a clip here and I'm going to play.
Are you ready to become the master?
As you can see, we will we will make the title The Master, and we want to make it pop out when he
says the master and then quickly disappear.
So how to make it?
You're in a project, been of your project and premier pro Uganda, you get here your your other objects
or titles and backgrounds, and now we're going to create a new title again.
We already know how to make it.
So again, fire left corner here, press on it.
New and legacy title and Prusak.
And now we're going to try to master here.
Again, you can choose your font.
Make it again bold or whatever you want.
I used boats, so I will do it again, but again, adjust its size into it and choose your color again.
We already know how to make it.
So I used some dark blue there.
What's it like this dark blue?
OK, Master.
OK, what to do now?
We're going to tie it to the second he says the mast.
So we play to become the OK master here.
I'm going to find the beginning of a condom.
OK, now he says the master here.
So I stop it here and place the master just above the clip.
I'm going to TriMet it again.
Press it, press again to play it, ready to become the master of the master.
OK, we're going to we're going to want to end it here.
So we're going to TriMet just as the clip.
And if I played from beginning to become the master of.
So this is it.
This is creating the title for your video.
It's very simple, but I think it's very effective and it looks nice and it's supposed to work.
You want to support OK, here we are.
And another chapter and this chapter is about popping the comment.
I'm going to show you the example again right now.
Writing to us now, getting clients into more and more happy, more and more professional and putting
the commands up to a screen.
It it looks very nice.
I think it's very effective and it's very simple to make.
So just take a screenshot of your comments or whatever pictures you want to make open like this, I
use it for comments, for positive comments.
And if you have your screenshots in your computer, again, in your finder, just again, select it
and drag it to your timeline.
Just like this, as you can see, is a picture.
You can again adjust its size.
I make it just like this.
I make it randomly placed another.
Place it above it, so if you place it above it, you can see there are two at one time.
If I move it there too at one time.
So I sound some place, some randomly here, make another move at.
Up here.
Go for another.
Go it just like this, and as you can see, if I if I extend the clips, there are more at one time,
so I'm going to choose another one to make it.
Good, Moorfield.
And said, let's say here, OK, just for example, I placed it randomly here, there are some space
that you can you can feel it if you want.
You don't have to.
So I just I just make it like this, for example.
And now what are you going to do here?
Just by trimming extending eclipse, by just dragging it just like this.
You can see if I make these little steps and play it, it makes it pops and here pops another hit,
pops another.
And here is the last one.
You can make the pops, like, more frequent, like short pauses.
So make just a smaller, let's say, the steps.
And if I play it now, you can see pops, pops, pops, and the comments are effectively popping on
your screen.
So this is very simple, just popping your PMG or JPEG files on your screen and it a nothing complicated.
And now what I use therefore, for Sound Effect, as you can see, I there are a little pop sound effects
and for this I use to click button effect.
I used some of some of this, let's say I use the second one, I'm not sure here, but let's say second
one.
Third one.
You can browse here whatever you like, let's say we like this one, this little click for popping.
So just try it again, just like a clip from it from the other side and move it.
And to your clip where you want to sound it, we can make it even a little smaller, the sound so we
can time it perfectly and for four pop, just make it make it below your clip when we know what a puppet.
And again, you're going to duplicate the sound effect by holding the left out.
So left out and again left out it, doing it again, left out, drag it and the left out drag it again.
And as you can see we get a five sound effects here and five comments here if I played.
As you can see, the sound effects really supporting like the visual effect of the popping of the comments.
So I think it's very effective.
You can use it if you want.
And I was terrific at the trailer, so we can use it now, too.
It's very simple and it's very effective.
OK, and the last chapter you may want to know how to do it is a 3D animation effect I used in the trailer.
I'm going to show that example right now.
And you can try Cellebrite.
So get ready because the success is no, man.
This is the two mission I use there.
And for making this, you need to know you need to have the after effects software for this.
I have this package of animated copyright objects, so I just open it after the loading.
We are here and after effects.
And as you can see in this package, we have a few beautiful, beautiful 3D objects, a pretty animated.
So you can use it in your videos.
I use it in traffic, a trailer, and I think I used the trophy there.
So you just select the trophy here.
You can see all the objects.
So I double click on top it if I want to use it.
And as you can see, it jumps right into the sequence trophy.
So this is already pre animated effect.
As you can see.
If I browse through the timeline, it's already animated.
But as you can see, I had a little adjust there and I change it a background.
And I had a title behind the object.
So how to make it?
So how to make a big round just again, simple click right, click here and go for new and here it's
got solid, like a solid color.
OK, or you can sorry.
You can here select your color.
I use the dark blue there.
Something like this press, OK, press, OK, as you can see, it created the deep blue one.
So I move it, I move it to the very bottom and as you can see, is now behind the object.
How to make it with text, with a text.
It's basically the same as the background.
You just simply could hear new and go for text.
It created empty text layer.
As you can see here, we are already typing to our to our workspace.
So we are going to type whatever we want.
I'm going to.
I'm going to type.
Effects here and there with a selection to in here, if you press on it, you can again adjust its size,
just like if you click on it and.
With or with shift, the best, if you if you press the shift was while scaling it, it keeps the proportion
of the text.
So I just left shift, hold it and hold the text by the corner and it keeps the portion of the text.
So we let's say we want to this big now how to place it below our object, our trophy again here just
a fax and move it by dragging.
To read bottom that above, to do deep blue solid, as you can see, we can even adjust your asset here,
so you just double click on it.
And here is your asset, if I Double-Click, again here on your asset, as you can see, it's your asset.
We can delete it here and go again for new and text again, type whatever you want.
I'm going to type trophy with a selection tool again.
Make it a little bigger if you want.
Of course.
And it's a little bigger text, maybe even a little bigger.
So you can see it of place it to the middle and here, close the window here, close, as you can see,
a great trophy title close to it again and here in trophy, it just affects and trophy.
So what to do now?
We going to renovate?
How to render your animation in here just simple left corner again here in the menu, click on composition
and now add to render cue, click on it.
And as you can see it already, it already jumps it into rendering you.
And now, as you can see, it's traffic.
And now we have some some settings here.
Usually what I do, I leave the best thing here you can output module here you can select your format.
I keep it like this.
You can you can change your change your color cultures.
I keep RGV and I just press OK, here, you can play with it, but I don't usually use it because I,
I just use it just it's preselected, so I press OK.
And now here out to be to we're going to play it to go to.
Our desktop name it trophy and a safe, and now we're in in the right section, you press on Brender.
OK, after rendering, we can jump back into our project and premier, pro and out in particular time
on this rendered 3D object, it's very simple.
You can again browse in your finder or on your desktop wherever you saved it.
And again, just drag it to your timeline, place it there.
And as you can see, it's a plate.
You can see very nice little animation, 3D effects, so you can use it, you can choose from the objects
we get there and you can play with it and place it into a video or trailer, whatever you are making.
So this was all the chapters you need to master for creating the trailer as I did.
You can see it's not very complicated.
If you go step by step, you can learn really, really fast and you will master it fast.
If you master all the sections, you'll be able to create the video just as a traffic at trailer.
So I hope you enjoy it.
I hope you learn something new today and I hope you will create a lot of new nice videos.